3 Basic Operation
DAG1000-1S/2S/4S User Manual
Copyright©2011-2017 Dinstar
14
T 3.0 (Pass-through)
: Under the pass-through mode, fax signal is not converted and fax
traffic is carried in RTP packets. It uses the G.711 A or G711U codec in order to reduce the
damage to fax signal.
Adaptive Fax Mode
:
automatically match with the fax mode of the peer device.
3.8 Function of RST Button
Press the RST button of DAG1000-1S/2S/4S for a moment, the running indicator will turn
from “slow flashing” into “no flashing”, and then turn into “slow flashing” again. That means
the device has been restored to factory defaults.
3.9 Query IP Address and Restore Default Setting
Query IP Address:
After connecting a telephone to the FXS port, you can dial *158# to query the IP address of
LAN port and dial *159# to query the IP address of WAN port.
Reset Password:
1.
On the “Security
Passwords” page of the Web interface, you can reset username and
password.
2.
You can also reset password through the Cloud platform.
3.
Connect a telephone with the DAG1000 device, and then dial *165*000000# to restore
username/password and network configuration to factory defaults.
Restore Device to Default Settings:
1.
Connect a telephone with the DAG1000 device, and then dial *166*000000# to restore all
configurations to factory defaults.
2.
Press the RST button for a moment, the running indicator will turn from “slow flashing”
into “no flashing”, and then become “slow flashing” again. That means all configurations
of the device has been restored to factory defaults.
3.
On the “Tools
Factory Reset” page of Web interface, click
Apply
to restore the
configurations of the device to factory defaults.
