Dinolift DINO XT II 160 Operating Instructions Manual Download Page 46

Page: 46 / 73

Operating instructions • DINO 160XTB II • 180XTB II • 210XTB II

DANGER

WARNING

CAUTION

NOTICE

It is strictly prohibited to take additional load in the upper position.

Do not exceed the lateral force (400N), or load the platform in the vertical direction more

than allowed.

Lowering the platform to the transport position

Always retract the telescope completely and turn the platform perpendicular to the boom

before lowering the boom onto the transport support.

DANGER

WARNING

CAUTION

NOTICE

Do not damage the handbrake lever or the tow-bar jockey wheel while lowering the platform

to the transport position!

When leaving the lift

• drive the lift to a safe position, preferably to the transport position

•

switch off the power unit

• prevent unauthorized use of the lift by locking the control centre cover

Summary of Contents for DINO XT II 160










































































Search results

Summary of Contents for DINO XT II 160

Reviews:

Related manuals for DINO XT II 160

Brands by name

Popular brands

Dinolift DINO XT II 160, Operating Instructions Manual

Search results

Summary of Contents for DINO XT II 160

Reviews:

Related manuals for DINO XT II 160

Brands by name

Popular brands