Dinolift DINO XT II 160, Operating Instructions Manual

Page: 22 / 73

22
Operating instructions • DINO 130T II
LIFTING AND WORKING ON THE PLATFORM
Never exceed the maximum number of persons, maximal loading or hand power, allowed for
the lift. Never add load onto the platform while in the upper position.
Before operating, always ensure that the safety devices and the emergency descent system
are in working order.
Use the safety harness!
Fix the safety harness
to the fixing points, intended for the purpose.
Note! The platform is fitted with a fixing point for the
safety harness of each user. Only one harness per
fixing point.
Do not use ladders, steps or other similar equipment
on the platform.
Ensure that the gates are properly closed before starting the operation. If the work platform
is equipped with ladder, these must be locked in the upper position.
Never throw or drop any objects from the platform. All the tools must be transported on the
inside of the platform. Never leave the tools hanging outside the work platform, supported
only by their power cord.
Do not lift the tools, accessories or other material on the railing of the platform or attached to
the railing.
The aerial work platform must not be used for lifting.
The work platform must not be used for transferring goods or persons between different
floors or working levels. Stepping on or off the platform in motion is prohibited.
When the boom is in its lowest positions, make sure it cannot clash during rotation with
structures that do not turn with the boom.
Always make sure, before lowering the platform, that the area under it is clear.
Avoid damaging the platform by lowering it on the ground, or bringing it in contact with any
structures.
Never use a lift alone. Make sure that there is always someone on the ground, who can call
for help in case of an emergency.