Dinolift DINO XT II 160, Operating Instructions Manual

Page: 28 / 73

28
Maintenance instructions • DINO 160XT II • 180XT II • 210XT II
7. Safety devices for hose rupture
All the load-bearing cylinders are equipped with valves for rupture or leak in the hydraulic
system, which prevent the load from falling.
Outrigger cylinders Lock valves
Prevent the inching of the
outriggers in either direction.
Lifting cylinder of the boom Load regulation valve Prevents the load from falling
Lifting cylinder of the
articulated arms
Load regulation valve Prevents the load from falling
Telescope cylinder Load regulation valve
Prevents the inching of the
telescope in either direction.
Levelling system Load regulation valves
Prevents the inclination of the
platform
8. Emergency stop buttons
Depressing the emergency stop button, stops all the movements immediately and turns off
the power unit. The button can be found at each control station. Once the button has been
depressed, only the emergency descent functions remain operational.
The emergency stop button locks in the lower position, and it must be released before
starting the power unit.
DANGER
WARNING
CAUTION
NOTICE
If the unit does not start, make sure that the emergency descent button is not in the lower
position at any of the control stations.
The emergency stop button in the platform control centre is fitted with a signal light, which
remains illuminated while the lift is in the normal operating mode. The light will go out, if
the emergency stop function is activated by any of the emergency stop switches or by the
safety device.