Dinolift DINO 105T, Operating Instructions Manual, Page: 64 / 78

DINO 105T
64
CONTROL CENTRE (UCB), RELAYS
K6:
BLOCKING RELAY FOR TURNING AND TELESCOPE
The telescope and turning movements are blocked during raising and lowering of the boom.
CONTROL CENTRE (UCB), SWITCHES
S4:
LOCKING EMERGENCY STOP PUSHBUTTON
Switches off the control voltage from contactor K1 and relay K2 and turns off the power unit
S5:
NON-LOCKING STOP BUTTON.
S6:
NON-LOCKING START BUTTON.
S7:
LEVER SWITCH FOR TURNING
S8:
LEVER SWITCH FOR RAISING - LOWERING OF THE BOOM
S9:
LEVER SWITCH FOR TELESCOPE IN-OUT MOVEMENT
S10:
NON-LOCKING SOUND SIGNAL BUTTON.
S11:
NON-LOCKING TURN SWITCH FOR II-SPEED
Operates as a dead-man-switch and a speed selector switch
CONTROL CENTRE (OCB), CONTROL OF OUTRIGGERS
S19:
SELECTOR SWITCH FOR OUTRIGGERS
For selection of movement direction, raising - lowering
S20:
NON-LOCKING PUSHBUTTON FOR SELECTION OF OUTRIGGER 1
S21: NON-LOCKING PUSHBUTTON FOR SELECTION OF OUTRIGGER 2
S22:
NON-LOCKING PUSHBUTTON FOR SELECTION OF OUTRIGGER 3
S23:
NON-LOCKING PUSHBUTTON FOR SELECTION OF OUTRIGGER 4
CONTROL CENTRE (PLCB) QUICKSILVER SWITCHES FOR LEVELLING OF THE
PLATFORM
HG1:
QUICKSILVER SWITCH FOR LEVELLING OF PLATFORM
Controls the relay K3 during raising of the boom.
Inclines the platform backwards, as necessary
HG2:
QUICKSILVER SWITCH FOR LEVELLING OF PLATFORM
Controls the relay K4 during lowering of the boom.
Inclines the platform forwards, as necessary
HG2, HG3:
SAFETY LIMIT SWITCHES FOR LEVELLING OF PLATFORM
Control the safety relay SR3.
As one of the four tips of the safety relays is switched open, the safety relay SR3 stops the power unit and
disconnects the control circuit of the boom valve 1B.