Dinolift DINO 105T, Operating Instructions Manual, Page: 23 / 78

DINO 105T
23
STARTING AFTER THE SAFETY DEVICES FOR THE PLATFORM LEVELLING HAVE
CAUSED STOPPING OF THE POWER UNIT
Before starting find out the reason why the safety devices have operated
- push the start button on the chassis or on the platform control panel and at the same time raise
the boom as much as is necessary to leave the power unit running
- lower the boom.
-
shut the power unit
The lift is now ready for operation.
With the boom slightly lifted and the telescope slightly extended, make sure that the platform does not
lower of itself while the operating controls are not being used.
Under cold conditions let the engine run for a while without load to raise the temperature of the
hydraulic oil. Carefully start the operation by driving the movements slowly back and forth from the
lower control panel without any load on the platform.
Move the platform to the work object
Note!
When bringing the platform to transport position always retract first the telescope completely and then
place the platform to the centre of the towbar. Lower the boom and extend the telescope to lock it in
the transport support.
DO NOT DAMAGE THE HAND BRAKE AND THE TOWBAR JOCKEY WHEEL!