Dinolift DINO 105T, Operating Instructions Manual, Page: 27 / 78

DINO 105T
27
MEASURES TO BE TAKEN AT THE END OF THE WORKING DAY
1.
Retract the telescopic boom completely.
2.
Check that the boom is parallel to the towbar.
3.
Lower the boom/platform onto the transport support on the towbar, extend the telescope until the
boom gets locked in its catch.
The limit switch on the transport support prevents the operation of the support outriggers if the
platform does not lie steady on the support.
4.
Close the cover of the platform control panel.
5.
Switch off the electric motor (11)
6.
Turn the selector switch 0 to position (1).
7.
Disconnect the lift from mains.
8.
Ensure that the covers are locked.
5 6 7
1
11