DINGLI JCPT1523DC Operators Manual With Maintenance Information Download Page 4

Page: 4 / 66

OPERATOR

’S MANUAL

with Maintenance Information

Important

Read, understand and obey these safety rules

and operating instructions before operating

this machine.

Only trained and authorized personnel shall be

permitted to operate this machine. This

manual should be considered a permanent

part of your machine and should remain with

the machine at all times. If you have any

questions, please call DINGLI Machinery.

Contents

Page

Safety Rules

Legend

Decals

Specifications

Control panel

Pre-operation Inspection

Workplace Inspection

Function Tests

Operating Instructions

Transport and Lifting Instructions

Maintenance

Schematic

Inspection and Repair Log

Owners, Users and operators:

We appreciate your choice of our machine for

your application. Our number one priority is

user safety, which is best achieved by our joint

efforts. We feel that you make a major

contribution to safety if you, as the equipment

users and operators:

1 Comply with employer, job site and

governmental rules.

2 Read, understand and follow the

instructions in this and other manuals

supplied with this machine.

3 Use good safe work practices in a

commonsense way.

4 Only have trained / certified operators,

directed by informed and knowledgeable

supervision, running the machine.

If there is anything in this manual that is not

clear or which you believe should be added,

please contact us.

Contact us:

Zhejiang Dingli Machinery Co., Ltd.

1255 Baiyun South Road. Leidian Town.

Deqing Zhejiang

China

Tel: +86-572-8681688

Fax: +86-572-8681690

Web: www.cndingli.com

E-mail:[email protected]

Summary of Contents for JCPT1523DC



































































Search results

Summary of Contents for JCPT1523DC

Reviews:

Related manuals for JCPT1523DC

Brands by name

Popular brands

DINGLI JCPT1523DC, Operators Manual With Maintenance Information

Search results

Summary of Contents for JCPT1523DC

Reviews:

Related manuals for JCPT1523DC

Brands by name

Popular brands