DINGLI JCPT1523DC, Operators Manual With Maintenance Information

Page: 30 / 66

OPERATOR
’S MANUAL
with Maintenance Information
Function Tests
25
⊙
Result: The LED indicator light should
come on.
Test the Horn
20 Push the horn button.
⊙
Result: The horn should sound.
Test Up/Down Functions and
Function Enable
21 Do not hold the function enable switch on
the control handle.
22 Slowly move the control handle in the
direction indicated by the blue arrow, then
in the direction indicated by the yellow
arrow.
⊙
Result: No functions should operate.
23 Press the lift function select button.
24 Press and hold the function enable switch
on the control handle.
25 Slowly move the control handle in the
direction indicated by the blue arrow.
⊙
Result: The platform should raise.
26 Release the control handle.
⊙
Result: The platform should stop raising.
27 Press and hold the function enable switch.
Slowly move the control handle in the
direction indicated by the yellow arrow.
⊙
Result: The platform should lower. The
descent alarm should sound while the
platform is lowering.
Test the Steering
Note: When performing the steer and drive
function test, stand in the platform facing the
steer end of the machine.
28 Press the drive function select button. The
indicator light should turn on.
29 Press and hold the function enable switch
on the proportional control handle.
Depress the thumb rocker switch on top of
the proportional control handle in the
direction identified by the blue triangle on
the control panel.
⊙
Result: The steer wheels should turn in the
direction that the blue triangle points on the
control panel.
30 Press and hold the function enable switch
on the proportional control handle.
Depress the thumb rocker switch in the
direction identified by the yellow triangle
on the control panel.
⊙
Result: The steer wheels should turn in the
direction that the yellow triangle points on
the control panel.
Test Drive and Braking
31 Press and hold the function enable switch
on the proportional control handle.
32 Slowly move the proportional control
handle in the direction indicated by the
blue arrow on the control panel until the
machine begins to move, then return the
proportional control handle to the center
position.
⊙
Result: The machine should move in the
direction that the blue arrow points on the
control panel, then come to an abrupt stop.
33 Press and hold the function enable switch
on the proportional control handle.
34 Slowly move the proportional control
handle in the direction indicated by the
yellow arrow on the control panel until the
machine begins to move, then return the
proportional handle to the center position.
⊙
Result: The machine should move in the
direction that the yellow arrow points on the
control panel, then come to an abrupt stop.
Note: The brakes must be able to hold the
machine on any slope it is able to climb.