DINGLI JCPT1523DC, Operators Manual With Maintenance Information

Page: 26 / 66

OPERATOR
’S MANUAL
with Maintenance Information
Pre-operation Inspection
21
Pre-operation Inspection
 Be sure that the operator’s manual are
complete, legible and in the storage
container located in the platform.

Be sure that all decals are legible and in
place. See Decals section.

Check for hydraulic oil leaks and proper
oil level. Add oil if needed. See
Maintenance section.

Check for battery fluid leaks and proper
fluid level. Add distilled water if needed.
See Maintenance section.
Check the following components or areas for
damage, improperly installed or missing parts
and unauthorized modifications:

Electrical components, wiring and
electrical cables

Hydraulic hoses, fittings, cylinders and
manifolds

Battery pack and connections

Drive motors

Wear pads

Tires and wheels

Ground strap

Limit switches, alarms and horn

Nuts, bolts and other fasteners

Platform overload components

Platform entry gate

Beacon (if equipped)

Safety arm

Platform extension(s)

Scissor pins and retaining fasteners

Platform control joystick

Brake release components

Pothole guard
Check entire machine for:

Cracks in welds or structural
components

Dents or damage to machine

Be sure that all structural and other
critical components are present and
all associated fasteners and pins are
in place and properly tightened

Be sure side rails are installed and rail
pins and bolts are fastened.

Be sure that the chassis trays are
closed and latched and the batteries
are properly connected.
Note: If the platform must be raised to inspect
the machine, make sure the safety arm is in
place. See Operating Instructions section.