Dillon Precision Products RL550C, Assembly And User Instructions Manual

Page: 18 / 76

18
7.1 Station 1—Insert Case Manually, De-prime, Size and Prime Case
•
Cases are De-primed and Sized on the downstroke of the Operating Handle.
Cases are primed on the full “push-stroke” of the Operating Handle from the neutral “at-rest” position,
•
The Index Sprocket indexes the Shellplate and Cases manually from station-to-station.
7.2 Station 2--Bell (flare) Case Mouths and Dispense Powder
•
The pistol case (not the rifle case) mouth is belled (flared) and powder dispensed into the case on the downstroke of
the Operating Handle in Station 2.
Case being pushed
over the nose of
the Power Funnel
as it enters the
Powder Die
Station 1
Station 1- Primer Picked up from Primer
Magazine by Primer Slide on Full Downstroke
of the Handle and Seated on full “push-stoke”
of Operating Handle
Station 1-Case entering
Depriming/Sizing Die
Station 2
Station 1-Case manually
inserted into Shellplate
Note Flaring feature of
Pistol Powder Funnel
Index Sprocket