Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC50/51
-
Mode of the serial interface
-
Unit number
-
additional options of the e.g. PLC option
or PLC option with text display
-
Number of internal analog outputs
-
CPU - Speed (clock) 16 or 25 Mhz
-
Hardware PLC - acceleration (on/off)
-
Configuration of the analog cam 1,2, up to 13.
-
Input and display format
-
Minimal input value ( - 10V)
-
Maximum input value ( + 10V)
-
Input number for switch to dis.value
-
Output value if switch off
-
Interpolation yes/no
For each of the analog cam the CamCon displays one more information menu. A maximum of 13
analog cam are possible.
-
Adjustements for OP-functions.
For each line of a menu-page information-menus are
shown.
8.1. Stack Info
If a non-defined error happens while the CamCon is in operation, the user is able to controll the stack-
variables' allocation which helps the software developers detection of effects. Use to stack-information-
menu for this purpose.
Please note the information shown on screen. At the moment, we are able to show a maximum of 6
stack-informnation menus. Please note their content and send it by fax to. +49/6126/945342.
Note:
Using a CamCon DC16; 40; 50/51 and DC90 only 4 stack-menus are shown. these are
called
iotask
,
rs232task
,
dc40task
and
main
A CamCon DC 115 also shows tasks
called
DC115_0
,
DC115_1;
a CamCon DC300 also shows
DC300.
,Version from: Aug. 04
Page: 78
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
