Digitronic
Digital Cam Switch Unit
Automationsanlagen GmbH
CamCon DC50/51
-
Factor of the speed display
-
Display format of the speed display
-
100% value for the speed display
-
Accuracy of the speed display
-
Display menu of the display type / Input for the
display change.
-
Cable length of the measuring system and the
external upgrade
-
Set planned value of the cycle time
-
Cycle time need by CamCon
-
Temperature in the encasement of CamCon
-
Output number of the security output
-
Format of the displayed actual value
-
Output number of the F / R output
-
Output number of the stand still output
-
Hysteresis for the recognition of the stand still
speed
-
Analog speed output "yes/no"
-
Number of analog cam outputs
-
Number of inputs and outputs
-
Number of outputs w. speed compensation
-
Input number for keyboard locking
-
Input number of error aknowledgement
-
Input number for output enable
-
Number of externally selectable programs
-
Input number of the first input for the external
program selection
-
Change mode of the program selection
-
Configuration of physcial hardware in- and
outputs
-
Configuration towards the CP-16-module
-
(Profibus, Interbus, Can-Bus).
-
PLC logic module configuration
-
PLC-Logic-module ON/OFF
-
Number of M-Registers
-
Number of X-Registers
-
Number of counters and times
-
Number of virtual inputs
-
Number of special inputs.
-
Number of shift registers with speed
compensation
,Version from: Aug. 04
Page: 77
2 rue René Laennec 51500 Taissy France
Fax: 03 26 85 19 08, Tel : 03 26 82 49 29
E-mail:[email protected]
Site web : www.hvssystem.com
