© 2022 Digitrax, Inc.
www.digitrax.com
15
Option
Switch #
Effect on System operation
Factory
Default
OPSW 02
t =
Command Station Mode
t
c =
Booster only Mode (not recommended)
OPSW 03
t =
’s booster normal
t
c =
’s booster is auto reversing
OPSW 06
t =
check for decoder before programming
t
c =
program without checking for a decoder
OPSW 13
t =
Loco address purge time 200 seconds
t
c =
Loco address purge time 600 seconds
OPSW 14
t =
Loco address purging enabled
t
c =
Loco address purging disabled
OPSW 15
t =
Purging will not change loco speed
t
c =
Purging will force a loco to 0 speed
OPSW 17
t =
Automatic advanced decoder assisted [FX] consists are enabled
t
c =
Automatic advanced decoder assisted [FX] consists are disabled
OPSW 18
t =
Normal booster short circuit shutdown time
t
c =
Extended booster short circuit shutdown time
OPSW 20
t =
Enable address 00 or analog stretching for
conventional locos
t
c =
Disable address 00 or analog stretching for
conventional locos
OPSW 21
OPSW 21-23 set the global system default type for “NEW” loco selec
-
tions. SW21/22/23 set as follows:
c-c-t =
128 step mode
c-c-c =
128 step FX mode
t-c-t =
14 step mode
t-t-t =
28 step
c
OPSW 22
c
OPSW 23
t
OPSW 25
t =
enable Route echo over LocoNet
t
c =
Disable Route echo over LocoNet
OPSW 26
t =
Disable routes
c
c =
Enable routes
Option Switch Tables
15
