DigiTech JamMan Solo Owner'S Manual Download

Page: 4 / 52

Warranty

We at

DigiTech

are very proud of our products and back up each one we sell with the following

warranty:
1. The warranty registration card must be mailed within ten days after purchase date to validate this

warranty.

2. DigiTech warrants this product, when used solely within the U.S., to be free from defects in mate-

rials and workmanship under normal use and service.

3. DigiTech liability under this warranty is limited to repairing or replacing defective materials that

show evidence of defect, provided the product is returned to DigiTech WITH RETURN AUTHO-

RIZATION, where all parts and labor will be covered up to a period of one year (this warranty

is extended to a period of six years when the product has been properly registered by mail or

through our website). A Return Authorization number may be obtained from DigiTech by tele-

phone. The company shall not be liable for any consequential damage as a result of the product’s

use in any circuit or assembly.

4. Proof-of-purchase is considered to be the burden of the consumer.

5. DigiTech reserves the right to make changes in design, or make additions to, or improvements

upon this product without incurring any obligation to install the same on products previously

manufactured.

6. The consumer forfeits the benefits of this warranty if the product’s main assembly is opened and

tampered with by anyone other than a certified DigiTech technician or, if the product is used with

AC voltages outside of the range suggested by the manufacturer.

7. The foregoing is in lieu of all other warranties, expressed or implied, and DigiTech neither assumes

nor authorizes any person to assume any obligation or liability in connection with the sale of this

product. In no event shall DigiTech or its dealers be liable for special or consequential damages or

from any delay in the performance of this warranty due to causes beyond their control.

Summary of Contents for JamMan Solo





















































Search results

Summary of Contents for JamMan Solo

Reviews:

Related manuals for JamMan Solo

Brands by name

Popular brands

DigiTech JamMan Solo, Owner'S Manual

Search results

Summary of Contents for JamMan Solo

Reviews:

Related manuals for JamMan Solo

Brands by name

Popular brands