DigiTech JamMan Solo Owner'S Manual Download

Page: 47 / 52

Factory Restore

This procedure will return the JamMan

Solo to its original factory settings. All internal

loop memories will be reformatted and the original 10 loops that shipped with the

JamMan Solo will be restored. Factory Restore does not affect any loops on the

optional external SD memory card.

WARNING: The Factory Restore procedure will erase all loops from the

JamMan Solo internal memory and restore it to its factory state. This

procedure is permanent and cannot be reversed. Use the Factory Restore

procedure with caution. It is recommended you back up your internal loops

to your computer with the JamManager

software and USB connection.

Press and hold the

STORE

button while powering up the JamMan Solo.

When the display shows

, release the

STORE

button which will now be flashing.

Press the

STORE

button again. This display will now show

asking if you are

sure you want to restore the internal memory to its factory state. To abort this

procedure at this time, press the Pedal Switch.

To confirm the restore procedure, press and hold the

STORE

button until

appears in the display. The JamMan Solo will return to normal operation shortly as

indicated by loop memory

being shown in the display.

Summary of Contents for JamMan Solo





















































Search results

Summary of Contents for JamMan Solo

Reviews:

Related manuals for JamMan Solo

Brands by name

Popular brands

DigiTech JamMan Solo, Owner'S Manual

Search results

Summary of Contents for JamMan Solo

Reviews:

Related manuals for JamMan Solo

Brands by name

Popular brands