manualshive.com logo in svg

DigiTech JamMan Solo, Owner'S Manual

Share
Download
DigiTech JamMan Solo Owner'S Manual Download Page 5

1

Congratulations and thank you

 for purchasing the JamMan® Solo! 

Designed for guitarists and bassists who want a full-featured looper in a compact form 

factor,  The JamMan Solo features 99 internal memory locations that can hold up to 35 

minutes of loops, plus an SD memory card expansion slot for another 99 locations that 

can store over 16 hours of loops!

The JamMan Solo also has USB connectivity and can sync to DigiTech’s free 

JamManager

TM

 software download that organizes and saves your loops to PC or Mac, 

and lets you quickly create JamLists to take to your gig.

The JamMan Solo is the perfect looper/phrase sampler for practicing, composing,  and 

performing:

Record rhythm loops and solo over them on the fly, completely  

• 

Hands-Free™. 

Load up the JamMan with bass lines, drums, harmonies, and more; create an entire 

• 

backup band, take it with you, and perform anywhere! 

Slow down or speed up any song without changing pitch.

• 

10 built-in rhythm (and applause) loops that you can play, edit, delete and restore (via 

• 

the Factory Restore feature).

The JamMan opens up new horizons to your musical explorations. The possibilities are 

literally endless, endless, endless...!

Summary of Contents for JamMan Solo





















































Reviews:

No comments

Brands by name

Popular brands

Load more brands