DigiTech GNX3, User Manual

Page: 34 / 84

Mod Mix - The Parameter 5 knob controls the mix (
mod mix
) of wet and dry signal. Ranges from 0
(all dry) to 99 (all wet).
Detune
A Detuner makes a copy of your incoming signal, takes the copied signal slightly out of tune from the
original, and mixes the two signals together. The result is a doubling type of effect as if two guitars
were playing the same part together.
Parameter 1 - The Parameter 2 knob adjusts the amount of pitch difference (
amount
) applied to
the copied signal. Ranges from -24 cents to +24 cents.
Parameter 2 - The Parameter 3 knob adjusts the left/right balance of the detuned signal. Ranges
from left 99 (
mod left
99
) to right 99 (
mod rght
99
).
Mod Level - The Parameter 5 knob controls the level (
mod levl
) of the detuned note. Ranges from
0 to 99.
The Parameter 4 knob does not function when the Detune effect is selected.
Pitch Shift
A Pitch Shifter copies the incoming signal, then shifts the pitch of the copied note to a different note.
The shifted note is then mixed back with the original signal sounding as if two guitars were playing
parallel notes.
Parameter 1 - The Parameter 2 knob adjusts the Amount of Pitch Shift (
SHIFT
) in intervals of one
semi-tone. Ranges from 24 semitones below to 24 semitones above.
Parameter 2 - The Parameter 3 knob adjusts the left/right balance of the shifted pitch.Ranges from
left 99 (
mod left
99
) to right 99 (
mod rght
99
).
Mod Level - The Parameter 5 knob controls the level (
mod levl
) of the shifted pitch. Ranges from
0 to 99.
The Parameter 4 knob does not function when the Pitch Shifter is selected.
Delay
Delay records a portion of the incoming signal, and plays it back a short time later. The recorded segment
can repeat just once, several times, or infinitely (that turns off the input to the Delay and lets you play
over the top of a passage in the Delay loop). The Delay in the GNX3 also includes a Ducker Threshold
that lets you set the signal strength required before the Delay records. This feature lets you control the
Delay with your playing.
Delay On/Off - The STATUS button turns the Delay (
delay
) on and off.
Delay Type - The Parameter 1 knob selects one of the 5 different types of Delay. The Delay choices
include:
Time - The Parameter 2 knob adjusts the length of time between repeats. Ranges from 10 MS
through 2000MS (10 through 2000 milliseconds) in 10 ms increments. Use the Data Wheel
while the Delay Time appears in the Display to adjust the Delay Time in 1 ms increments.
MONO
(clear concise repeats)
pingpong
( bounces from side to side)
ANALOG
(deteriorates with each repeat)
anlgpong
(side to side with deterioration)
Spread
(clear concise repeats with stereo
imaging)
28
Effects and Parameters