DigiTech GNX3, User Manual

Page: 74 / 84

3. Use the DATA WHEEL to select the User Bank you want to rename.
4. Press STORE to access the naming menu.The far left character of the Bank name begins to blink.
5. Use the DATA WHEEL to select the desired alpha-numeric character.
6. Press the DRUMS button to select the next character to the right, and the MODE button to select
the previous character to the left.
7. Repeat steps 5 and 6 until the Bank name appears in the display.
8. Once the Bank name appears correctly in the display, press
STORE again.
namesavd
is displayed
briefly indicating the Bank name has been saved, and then new Bank name appears.
9. Press EXIT to return to the GNX3 presets.
MIDI Channel
The GNX3 MIDI channel is only used for receiving incoming MIDI data. The GNX3 does not send MIDI
program change commands or CC data.The procedure for selecting the MIDI channel is as follows:
1. Press the UTILITY button. The Utility button’s LED lights.
2. Using the MODE or DRUMS buttons, scroll to the left or right until
midichnl
is displayed. The
numeric display show the selected MIDI channel.
3. Rotate the DATA WHEEL to select the MIDI channel. Your choices include
1
through
16
,
AL
(all),
and
of
(off).
4. Press EXIT to return to the GNX3 presets.
Bulk Dump
The Sysex Bulk Dump uploads all the GNX3 presets and utility data to a sysex librarian, or MIDI
recording device.This is useful for making a backup copy of all your customized settings. The procedure
for performing a Bulk Dump is as follows:
1. Connect a MIDI cable from the GNX3 MIDI Out to the the MIDI In of a MIDI recording device.
2. Press the
UTILITY button. The Utility button’s LED lights.
3. Using the MODE or DRUMS buttons, scroll to the left or right until
Bulkdump
is displayed. The
Store button blinks indicating it must be pressed to begin the bulk dump.
4. Set the MIDI recording device to record.
5. Press
STORE to begin the dump.The display reads
SeNDBuLK
until the dump is complete at which
time the display reads
bulkdump
.
6. Press EXIT to return to the GNX3 presets.
NOTE :The Bulk Dump sends information on the MIDI channel defined in the MIDI Channel menu.
MIDI Preset Dump
The Sysex Preset Dump uploads individual GNX3 presets to a sysex librarian, or MIDI recording device.
This is useful for making a backup copy of customized presets, or copying your presets into another
GNX3. The procedure for performing a Sysex Preset Dump is as follows:
1. Connect a MIDI cable from the GNX3 MIDI Out to the the MIDI In of a MIDI recording device or the
MIDI in of another GNX3.
2. Press the UTILITY button.The Utility button’s LED lights.
3. Using the MODE or DRUMS buttons, scroll to the left or right until
PrSTDuMP
(Preset Dump) is
displayed.
4. Use the DATA WHEEL to select the preset number you want to dump.
68
Other Functions