DigiTech GNX3, User Manual

Page: 56 / 84

Using Undo While Playback is in Progress
You can also Undo a track while playback is in progress. This essentially deletes the track recorded to
last. To undo the track while playback is in progress, follow these steps:
1. Press the UNDO button once. The GNX3’s main display reads
del trkx
. If you want to delete a
different track, press the track button you want deleted.
2. Press the UNDO button again within 3 seconds to delete the track. The recorder deletes this
track and continues the song playback. If the UNDO button is not pressed again within 3 seconds
of the first press, the recorder ignores the undo request and playback continues unaffected.
Playing Back a Recorded Track
After a track is recorded, playing it back is simple. If you are at the end of the track or the song, press
PLAY. The recorder automatically begins playing back the track/song from the very beginning. If you want
to start playback at the beginning of a track or song but are someplace other than the end of the song,
follow these steps:
1. Begin with the Recorder stopped.
2. Press the
REWIND button once to move to the beginning of the song. Press and hold the rewind or
fast forward buttons to quickly move back and forth through the track until it is released.
3. Press the PLAY button. The newly recorded track is automatically armed in PLAY status (the track
button is lit green) and the track begins playing back.
Setting Track Playback Levels and Panning
After a track has been recorded, you can set the pan and playback level for each track. This is done using
the LEVEL / PAN button. This feature is most useful if done while the recording is playing back so you
can hear the changes as they are being made. To set level and pan controls for each track, follow these
steps:
Setting each track’s playback level:
1. Press the REWIND button once to return the song to the beginning.
2. Place any track(s) you want to playback by pressing their TRACK buttons until they are lit green.
1 00 00
50
Recorder