WEBVIEWER*
S e t u p > S y s t e m > N e t w o r k S e t t i n g
V i e w t h e M E G A p i x ® C a a S ™ c a m e r a ’ s b a s i c i n f o r m a t i o n .
This page displays the camera’s main information including:
1. IP Type – Select whether the camera’s IP address will be static or DHCP. Select DHCP if you are
using a DHCP Server. When the camera is set to DHCP, it will obtain all its network information
automatically from the server. If you do not have a DHCP server, or wish to manually enter the
camera’s network information, select STATIC. To obtain a static IP Address and network
information, contact your Internet Service Provider (ISP) or Network Administrator.
2. IP Address – Enter an IP address for the camera
3. Netmask – default is 255.255.255.0
4. Gateway – This is your router’s external IP address. This address is used when accessing the
camera remotely from outside the network. The router will channel the data request to the
appropriate port associated with the camera.
5. DNS – Enter a DNS address. The Domain
Name Server translates a web addresses to
an IP addresses.
6. Camera Name – If needed, rename the
camera for proper identification.
7. UPnP – Enable or disable the camera’s
UPnP function according to your network
requirements.
8. Web Port – By default, the camera’s web port
is set to 80. These are the ports necessary in
order to communicate with the camera when
accessing from a different network. Some
ISP may block port 80. Please contact your
Network Administrator for additional
information.
3 5