Digital Watchdog DWC-PTZ10x, User Manual, Page: 45 / 49

DWC-PTZ10x [Mini SPEED DOME CAMERA]
www.Digital-Watchdog.com
45/49
TIP: Set Home Position
When you replace the camera block or the orientation of camera is changed due to maintenance
operations, it is very difficult to maintain same pan orientation. Therefore, all function data depending
on pan orientation such as preset, pattern, Group, Scan, and privacy zone mask are not useful any more
accordingly. However, even in this case, you can reuse the data if you redefine Set Home Position on the
previous Home position. It is recommendable to memorize the target scene of current Home position.

FAN
RUN TEMP
Above this temperature, the blower fan will start
automatically.
Range: 30 ~ 80
℃
( 86 ~ 176
℉
)

HEATER
RUN TEMP
Bellow this temperature, the Heater will be tuned
on automatically.
Range: -10 ~ 20
℃
( 14~ 68
℉
)
 SET HOME
POSITION
HOME position means the origin of PAN angle
calculation. The value of PAN angle displayed on
the screen is based on this HOME position.
Using Joystick, move the camera to the desired
position and press ENTER (NEAR/SAVE).
It is noted that Home does not affect Tilt angle.
If you change the location of Home position, all
horizontal locations of functions such as preset,
pattern, scan, auto pan, and privacy zone mask
will be shifted based on changed Home position.

SET
NORTH
DIRECTION
You can set up North direction.
Using Joystick, move the camera to the desired
NORTH position and press ENTER (NEAR/SAVE).
The direction will be displayed in the screen
[PAN AXIS / TILT AXIS / ZOOM / DD]
DD is direction and will be displayed from:
N/NE/E/SE/S/SW/W/NW
 LANGUAGE You can select a preferred Language of OSD display
from 7 choices.
[ENGLISH/ESPAÑOL/FRANÇAIS/DEUTSCH/ITALIANO
/
РУССКИЙ
/PORTUGUÊS]
After selecting a language, press Enter (NEAR) key.
HOW TO USE OSD MENU
4
FAN/HEATER SETUP
--------------------------
FAN RUN TEMP 40
°
C
HEATER RUN TEMP 15
°
C
EXIT
BACK