Digital Watchdog DWC-PTZ10x, User Manual, Page: 35 / 49

DWC-PTZ10x [Mini SPEED DOME CAMERA]
www.Digital-Watchdog.com
35/49
Preset Setup
 Preset Number [1~128]
If a selected preset is already defined,
camera moves to pre-defined position and
preset characteristics such as Label and
Relay Outputs show on monitor. If a selected
preset is not defined, “UNDEFINED” shows
on monitor.

Edit Preset Scene Redefine current Preset scene position (i.e.
PTZ).
 Edit Preset Label Edits Label to show on monitor when preset
runs. MAX. 10 characters are allowed.
 Clear Preset [CANCEL/OK]
Delete current Preset data
 CAM Adjust [GENERAL/SPECIAL]
WB(White Balance) and AE(Auto Exposure)
can be set up independently for each preset.
There are 2 modes, "General" mode &
"Special" mode. The General mode means
that WB or AE can be set up globally for all
presets in "CAMERA SETUP" menu.
The Special mode means that WB or AE can
be set up independently or separately for
each preset in each preset setup menu. Each
Special WB/AE value will be applied when
camera arrives to the preset location. During
jog operation, General WB/AE value should
be applied.
All Special WB/AE values will not be affected
by General WB/AE value changes. If “Special’’
is selected, Menu to set WB/AE shows on
monitor. Its default is GENERAL.

Alarm out Relay Output can be linked with Preset run.
The character
“
-
“
means disable while the
number
“
1
”
representing each bit means
ON.
Ex) If it is set to
“
1
”
, Output relay will be
ON whenever you call this Preset
4
HOW TO USE OSD MENU
PRESET SETUP
--------------------------
PRESET NO. 1
<EDIT SCENE>
BACK
EXIT
<LABEL> NORTH GATE
CLR PRESET CANCEL
CAM ADJUST GENERAL
ALARM OUT -