Digital Watchdog DWC-PTZ10x, User Manual, Page: 12 / 49

DWC-PTZ10x [Mini SPEED DOME CAMERA]
www.Digital-Watchdog.com
12/49

Communication Protocol Setup
1 2 3 4 5 6
ON
ON
7 8

Communication Baud rate Setup
1 2 3 4 5 6
ON
ON
7 8

RS-485 Termination Resistor
1 2 3 4 5 6
ON
ON
7 8
RS-485 Termination Resistor (On/Off)

Select the appropriate Protocol with DIP switch combination.
Switch State
Protocol
SW-1 SW-2 SW-3 Sw-4
OFF OFF OFF OFF Auto Protocol
ON OFF OFF OFF PELCO-D
OFF ON OFF OFF PELCO-P
ON ON OFF OFF SAMSUNG
 If you set the protocol as Auto Protocol, camera will
automatically recognize the type of Protocol.
 Auto Protocol supports Pelco-D and Samsung Protocol.

If you want to control using DVR or system keyboard, their
protocol must be identical to camera. Otherwise, you cannot
control the camera.

If you changed camera protocol by changing DIP S/W, the
change will be effective after you reboot the camera.

Factory default of protocol is “Auto Protocol”
INSTALLATION
2
 Pin 8 is used for ON/OFF of RS-485 Termination. Normally, it
must be OFF state. Especially when you have trouble with long
Daisy chain style connection, turn ON this termination switch of
last camera.
 Pin 8

Select the appropriate Baud rate with DIP switch combination.
Switch State
Protocol
SW-5 SW-6 SW-7
OFF OFF OFF 2400 BPS
ON OFF OFF 4800 BPS
OFF ON OFF 9600 BPS
ON ON OFF 19200 BPS
OFF OFF ON 38400 BPS

Factory default of Baud rate is “9600 BPS”