DWC-PTZ10x [Mini SPEED DOME CAMERA]
www.Digital-Watchdog.com
10/49
Parts Name & Functions
Main Unit / Surface Mount Bracket
Back of Main Unit
Surface Mount Bracket
This is used to install the camera directly on the ceiling. After
separating the cover attach this directly to ceiling. Camera must be
assembled at the last stage.
Do not use this bracket when installing camera on the wall with
wall mount bracket or on the ceiling with ceiling mount bracket.
Separating Slit
Using a coin, you can separate upper part lower body of the dome.
Dome Cover
Do not detach protective vinyl from dome cover before finishing
the installation process to protect dome cover from scratches or
dust.
DIP Switch
Adjusts camera ID and protocols.
Cable Duct
When you want to install the camera on the surface of hard ceiling,
you need to handle the cable through side of the dome. In this
case, break the side wall bit and feed the cable through the cable
duct.
INTRODUCTION
1
Surface
Mount Bracket
Mounting Hole
Main Body
Lockup Screw
Dome Cover
Cabling
Terminal Black
Prototol&Braud-rate
Dip switches