Digital Watchdog DWC-PTZ10x, User Manual, Page: 27 / 49

DWC-PTZ10x [Mini SPEED DOME CAMERA]
www.Digital-Watchdog.com
27/49
Other Functions
 Preset Lock This function is made to protect preset data from unauthorized overwriting. If
Preset Lock is ON, Preset save command using Hot Key is disabled while saving a
Preset via the OSD Menu is acceptable.
 Power Up Action
This function enables the camera to resume programmed actions such
as preset, Pattern, and Scan when the power been cycled

Auto Flip In case the tilt angle arrives at the top of tilt orbit (83°), the zoom module
camera keeps moving to opposite tilt direction (180°) to keep tracing targets. As
soon as the zoom module camera passes through the top of tilt direction (83°),
images should be reversed automatically and F appears in screen. If this function
is set to OFF, tilt movement range is 0 ~ 95°.
 Parking Action This function enables the camera to park in a specific position automatically if
operator doesn’t operate the controller for a while. The Park Time can be defined
as an interval from 1 minute to 4 hours.
 Alarm Input 2 Alarm Inputs are available. If an external sensor is activated, camera can be set
to move to corresponding preset position. It is noted that the latest alarm input
is effective if multiple sensors are activated.
 Privacy Zone Mask To protect privacy, MAX. 4 Privacy Masks can be created in arbitrary positions to
hide objects such as windows, shops or private house. With a Spherical
Coordinates system, powerful Privacy Zone Mask function is possible.
 GENERAL/SPECIAL
Image Setup
WB(White Balance) and AE(Auto Exposure) can be set up independently for each
preset. There are 2 modes, "General" mode & "Special" mode. The General mode
means that WB or AE can be set up completely and simultaneously for all presets
in "ZOOM CAMERA SETUP" menu. The Special mode means that WB or AE can
only be set up independently or separately for each preset in each preset setup
menu. Each Special WB/AE value should activate correspondingly when camera
arrives at each preset location.
During jog operation, General WB/AE value should be applied. All Special WB/AE
value will not be changed regardless of General WB/AE value change.

Semi Auto Focus
This mode enables the camera to switch focus mode automatically operation by
operation. Manual focus mode is selected during preset operation and Auto
focus mode is recovered if jog operation is started. During Preset action, instead
of auto focusing, manual focus data stored when it is created will be applied as
soon as camera arrives to the preset. This is helpful to get well-focused image in
a short time
.
OPERATION
3