DWC-PTZ10x [Mini SPEED DOME CAMERA]
www.Digital-Watchdog.com
37/49
Scan Setup
APAN Number
[1~8]
Selects Auto Pan number to edit. If a selected
Auto Pan has not defined, "NOT USED" is
displayed in 1st Position and 2nd Position
1st Position
2nd Position
[PRESET 1~128]
Set up the 2 position for Auto Pan function. If
a selected preset is not defined, "UNDEFINED"
will be displayed as shown below.
When Auto Pan function runs, camera moves
from the preset assigned as the 1st point to
the preset assigned as the 2nd point in CW
(Clockwise) direction. Then camera moves
from the preset assigned as the 2nd point to
the preset assigned as the 1st point in CCW
(Counterclockwise) direction. In case that the
preset assigned as the 1st point is same as the
preset assigned as the 2nd point, camera turns
on its axis by 360
in CW direction and then it
turns on its axis by 360
in CCW direction.
APAN Speed
[1
/sec ~180
/sec]
Sets Auto Pan speed from 1
/sec to 180
/sec.
Clear APAN
[CANCEL/OK]
Deletes current Auto Pan data.
HOW TO USE OSD MENU
4
AUTO PAN SETUP
--------------------------
APAN NO. 1
1ST POS. NOT USED
2ND POS. NOT USED
APAN SPEED 30/SEC
BACK
EXIT
CLEAR APAN CANCEL
AUTO PAN SETUP
--------------------------
APAN NO. 1
1ST POS. PRESET5
2ND POS. NOT USED
UNDEFINED