DWC-PTZ10x [Mini SPEED DOME CAMERA]
www.Digital-Watchdog.com
23/49
Preset
Function
Max. 127 positions can be stored as Preset positions. The Preset number can be
assigned from 1 to 128. It is noted that preset “
95
” is reserved for starting OSD
menu.
Camera characteristics (i.e. White Balance, Auto Exposure) can be set up
independently for each preset and they are adjusted by using OSD menu. Four
relay outputs can be controlled in conjunction with one Preset.
Set Preset
<Set Preset> [1~128]
Run Preset
<Go Preset> [1~128]
Delete Preset
To delete Preset, use OSD menu.
Scan
Function
By using Scan function, you can make the camera move between 2 Preset positions
repeatedly. When Scan function runs, the camera moves from the preset assigned as
the 1st point to the preset assigned as the 2nd point in a CW(Clockwise) direction.
Then camera moves from the preset assigned as the 2nd point to the preset assigned
as the 1st point in a CCW(Counterclockwise) direction.
In a case where the preset assigned as the 1st point is the same as the preset
assigned as the 2nd point, camera turns on its axis 360
in a CW(Clockwise) direction
and then it turns on its axis 360
in a CCW(Counterclockwise) direction.
Speed can be set up from 1
/sec to 180
/sec.
Set Scan
To set Scan, use OSD menu.
Run Scan
Method1) <Run Scan> [Scan NO.] [Enter]
Method2) <Go Preset> [Scan NO.+140]
ex) Run Scan 2 : <Go Preset> [142]
Delete Scan
To delete Scan, use OSD menu.
OPERATION
3