Digital Projection TITAN sx+-500, User Manual

Page: 54 / 120

Rev C March 2008 page 4.12
4. Controlling the projector Digital Projection
TITAN sx+-500
User Manual
Notes
For more information about
input modes and input presets,
see earlier in this section, Input
modes and settings.
A preset can be applied only to
the same mode for which it was
created. If the detected input
mode does not match, then
settings from the mode history
or mode library will be applied.
For more information about
input modes, see Input modes
and settings. earlier in this
section.
Input Presets
Recall
•
To recall a set of modal settings that have been saved, press and hold ,
whilst pressing the lettered key A – S .
The projector will switch to the saved input source, and redetect the input mode
before applying the saved modal settings.
Save
•
To save the current input source, mode and modal settings, press and hold
, whilst pressing the lettered key A – S .
If this Preset has been used before, and the Input source has been changed,
then the following message will be displayed.
Press and to select either OK or Cancel .
Press to confirm your selection.
The modal settings will be saved to the selected preset, and the following
message will be displayed.