Digital Projection TITAN sx+-500, User Manual

Page: 76 / 120

Rev C March 2008 page 4.34
4. Controlling the projector Digital Projection
TITAN sx+-500
User Manual
Notes
Setup Menu
Global Colourimetry
Some menu items may be
greyed out - unavailable due to
the effect of settings made in
other menus, or due to the type
of input signal.
Read these notes on Colour
and Global Colourimetry
before making any settings in
the Colour menus.
Global Colourimetry
•
Press and to select Global Colourimetry .
Press to open the Global Colourimetry submenu.
Setup menu continued
Notes on Colour and Global Colourimetry
Global Colourimetry menu (see this section)
After a calibration check on the projector or venue, a set of Global colour settings
can be made in the
Global Colourimetry menu. These settings are then available
to be copied at any time using the Colour Mode setting in the Colour menu, or
used as a starting point using the Trim feature in the Colour menu.
Colour menu (see earlier in this section) .
The settings made in the Colour menu will be automatically saved in the Mode
History , or can be manually saved to one of the Input Presets (see Input modes
and settings earlier in this section).
The selections available in Colour Mode in the Colour menu are:
Global Copies the settings made in the Global Colourimetry menu
Temperature Set the colour temperature using the slider
User Set the Red, Green and Blue Lift and Gain using the sliders
Peak Preset high brightness setting
Video, Film,
Graphic Applies the factory set P7 settings
User 1, 2 Applies the User gamma settings made externally using the
DP Userware on a personal computer