Digital Projection TITAN sx+-500, User Manual

Page: 50 / 120

Rev C March 2008 page 4.8
4. Controlling the projector Digital Projection
TITAN sx+-500
User Manual
The control panel
Keypad layout
The controls on the keypad are identical to those at the top of the remote control,
and are described on the following pages.
Projector status indicators
The indicators on the control panel are as follows:
Power off = NO POWER
green = normal RUNNING mode amber = STANDBY mode
Shutter yellow = CLOSED green = OPEN
Error off = NO ERROR
flashing = ERROR (temperature) steady = ERROR (voltage)
IR blue flash = Remote control command received
Lamp 1 off = OFF
red = LAMP ERROR green = ON (100%) amber = ON (80 - 99%)
flashing green/amber = LAMP COOL-DOWN or WARM-UP
Lamp 2 off = OFF
red = LAMP ERROR green = ON (100%) amber = ON (80 - 99%)
flashing green/amber = LAMP COOL-DOWN or WARM-UP
Notes
Many features are controlled
from the menus using the menu
navigation keys
on the remote
control or keypad.
For more information about
using the menus, see later in
this section,
Using the menus .
Some of the menu features, for
example brightness, contrast
and input preset operations, can
be accessed directly using the
control keys at the bottom of
the remote control.
Other features, eg zoom and
focus, are controlled using the
control keys at the top of the
remote control and keypad.
For more information about
using the control keys, see later
in this section, Using the
control keys
.