Digital Projection TITAN sx+-500, User Manual

Page: 88 / 120

Rev C March 2008 page 4.46
4. Controlling the projector Digital Projection
TITAN sx+-500
User Manual
Notes
Restore Defaults will restore
all settings to factory
defaults.
If you are not sure this is
what you want to do, then
either:
make a record of all settings
first
or
select No , then press .
Following a restore to factory
defaults, the projector will
perform a self-test and enter
Standby mode.
This process will take up to 10
seconds. During this time the
projector will not respond to any
commands.
When complete, all settings will
be restored to factory condition
and all user settings will be
removed except for downloaded
colour and gamma parameters.
Restore Defaults
•
Press and to select Restore Defaults .
Press .
The following message will be displayed.
Press and to select from:
Yes
Press to confirm your that you really wish to restore all default settings.
•
All settings will be restored to factory defaults.
or Cancel
Press or to exit without making the change.
Setup menu, continued