Digital Projection TITAN sx+-500, User Manual

Page: 108 / 120

Rev C March 2008 page 7.12
7. Appendix Digital Projection
TITAN sx+-500
User Manual
4. SDI input
1 x 75 ohm BNC
SMPTE 292 / HD-SDI signals are very high speed digital signals which require
better quality coaxial cable than conventional analogue video. The data rate is 1.5
Gigabits per second.
In choosing cable length and connectors for any installation the frequency response
loss in decibels should be proportional to 1
√
f, from 1MHz, to 1.5GHz. The following
or similar cable specification should be used to ensure fault free communication
between source and projector.
Belden 8281 cable or equivalent
5. Composite video input
1 x 75 ohm BNC
PAL or NTSC video
6. S-Video input
4 pin mini-DIN
1 L Ground
2 C Ground
3 Lumunance (Y)
4 Chrominance (C)
7. Component video input
4 x 75 ohm BNC
Used for standard definition interlaced signals only
RGsB RGBS YCrCb
R R Cr
G + Sync G Y + Sync
B B Cb
Sync
Notes
pin view of female connector