page 64
Digital Projection M-Vision 930 Series
Operating Guide
USING THE PROJECTOR
Rev C February 2015
Setup menu
•
Orientation
Choose from
Desktop Front
,
Ceiling Front
,
Desktop Rear
and
Ceiling Rear
.
•
Auto Power Off
Set this to
On
if you want the projector to go into STANDBY mode when no
input source is detected for 20 minutes.
•
Auto Power On
•
Set this to
On
if you want the projector to start up immediately when the
mains is connected.
•
Set this to
Off
if you want the projector to go into STANDBY mode when
the mains is connected. In this case, the projector will not start up until the
POWER
button is pressed on the control panel or the remote control.
•
Startup Logo
Set this to
On
if you want the DP logo to show when the projector is first
switched on.
•
Blank Screen
Choose from
Logo
,
Black
,
Blue
and
White
.
•
Trigger1
and
Trigger 2
Choose from
Screen
,
16:9
,
TheaterScope
,
4:3
,
4:3 Narrow
or
RS232
to
determine what will cause each trigger output to activate.
•
Auto-Source
If this setting is
On
, the projector will automatically search for an active input
source.
•
Infrared Remote
Switch the remote control on and off.
•
Network
Access this submenu to set up a LAN
network connection.
•
On Screen Display
Access this submenu to adjust the appearance and position of the on-screen
display.
•
Presets
Access this submenu to save up to four presets containing custom
combinations of image settings, or to recall a saved preset.
Notes
If you turn the remote control off,
you can only turn it back on again
from the control panel.
Setup >>
Select Item
[Menu] Return
Auto Power Off
Auto Power On
Startup Logo
Blank Screen
Trigger 1
Orientation
Off
Desktop Front
Trigger 2
Auto Source
Infrared Remote
Network
Off
On
Logo
16:9
Off
Screen
Adjust
On Screen Display
Presets
On
