page 28
Digital Projection M-Vision 930 Series
Connection Guide
SIGNAL INPUTS
Rev C February 2015
3D connections
3D sources up to 60Hz requiring frame doubling and left/right interleaving
1. Connect to either of the following inputs on the connection panel:
•
HDMI 1
•
HDMI 2
•
HDBaseT
2. Set
3D Format
in the
3D
menu to match the format of the incoming signal. Choose from
Auto
,
Side by Side (Half)
and
Top and Bottom
.
The
Frame Packing
format is automatically detected by the projector.
Frame sequential 3D sources up to 120Hz
•
Connect to the DVI input.
The
Frame Sequential
format is automatically detected by the projector and is supported on the DVI input only.
Dual Pipe 3D
1. Connect the left eye output to the
HDMI 1
socket and the right eye output to the
HDMI 2
socket.
2. Set
3D Format
in the
3D
menu to
Dual-Pipe
.
Notes
For a complete listing of all
supported signal input modes, see
Appendix C: Supported Signal
Input Modes
in the
Reference
Guide
.
For a complete listing of pin
configurations for all signal and
control connectors, see
Appendix
E: Wiring Details
in the
Reference
Guide
.
1
HDBaseT
2
DVI
3
HDMI 1 / Dual Pipe LEFT
4
HDMI 2 / Dual Pipe RIGHT
4
2
3
1
