page 41
Digital Projection M-Vision 930 Series
Operating Guide
USING THE PROJECTOR
Rev C February 2015
Image menu continued from previous page
Gamma
Choose a de-gamma curve from
1.0
,
1.8
,
2.0
,
2.2
,
2.35
and
2.5
.
Used correctly, the
Gamma
setting can improve contrast while maintaining good
details for blacks and whites.
If excess ambient light washes out the image and it is difficult to see details in dark
areas, lower the
Gamma
setting to compensate. This improves contrast while
maintaining good details for blacks. Conversely, if the image is washed out and
unnatural, with excessive detail in black areas, increase the setting.
Dynamic Black
Set to
On
to allow for increased contrast in darker scenes by modulating the light
source.
Adaptive Contrast
Set to
On
to expand the light and dark portions of the contrast curve of the image,
depending on the mean luminance of the image.
Saturation, Hue, Sharpness and Noise Reduction
Highlight the setting you wish to edit, and then press
ENTER/SELECT
, or the
LEFT
or
RIGHT
arrow button to open the slider.
Use the
LEFT
and
RIGHT
arrow buttons to adjust the slider.
Press
MENU
to close the slider.
Notes
Select Item
[Enter] Execute
[Menu] Return
Brightness
1.8
2.0
2.2
2.35
2.5
1.0
Contrast
Gamma
Adaptive Contrast
Saturation
Hue
Sharpness
Noise Reduction
Position and Phase
Resync
Image >>
Picture Mode
Dynamic Black
Select Item
[Enter] Execute
[Menu] Return
Brightness
On
Off
Contrast
Gamma
Adaptive Contrast
Saturation
Hue
Sharpness
Noise Reduction
Position and Phase
Resync
Image >>
Picture Mode
Dynamic Black
