page 59
Digital Projection M-Vision 930 Series
Operating Guide
USING THE PROJECTOR
Rev C February 2015
3D menu
Use this menu to enable, disable and set up 3D input, as follows:
•
3D Format
—
Off
,
Auto
,
Side by Side (Half)
,
T
op and Bottom
and
Dual-Pipe
.
•
DLP Link
—
On
(if you are using 3D glasses that can utilise the DLP Link®
signal embedded in the image) and
Off
•
3D Swap
—
Normal
and
Reverse
(set to
Reverse
if the left- and right-eye
images are displayed in the wrong order)
•
Dark Tim
e
—
0.65 ms
,
1.3 ms
,
1.95 ms
and
2.5 ms
. Set to reduce the
effect of images overlapping while the glasses are switching
•
Sync Offset
— use the
LEFT
and
RIGHT
arrow buttons to compensate
for signal processing delays in the projector.
Notes
For further information about
supported 3D formats, see
3D
connections
in the
Connection
Guide
.
If
3D Format
is set to
Off
, or if
no 3D signal is detected in
Auto
mode, the following settings will be
unavailable:
•
3D Swap
•
Dark Time
•
Sync Offset
Frame Sequential
is supported on
the DVI input only.
3D video is only possible on the
HDMI, HDBaseT and DVI inputs.
The
Frame Packing
format is
automatically detected by the
projector.
See also
3D types
and
Some 3D
settings explained
further in this
guide.
3D >>
Select Item
[Menu] Return
Eye Swap
Dark Time
Sync Offset
3D Format
Auto
Adjust
DLP Link
