page 4
Digital Projection M-Vision 930 Series
Installation and Quick-Start Guide
CONNECTING THE POWER SUPPLY
Rev C February 2015
Connecting The Power Supply
1. Make sure the
voltage switch
is
set to the correct voltage.
2. Make sure the
mains power
button
is in the OFF position.
3. Lift the
cable lock
up, push the
mains connector in firmly and push
the lock down to secure the cable.
4. Switch the
mains power button
ON.
Notes
Use only the power cable
provided.
Ensure that the power outlet
includes a ground connection as
this equipment MUST be earthed.
Handle the power cable carefully
and avoid sharp bends. Do not
use a damaged power cable.
3
1
2
1
Voltage switch
2
Mains power button
3
AC mains inlet with cable lock