page 50
Digital Projection M-Vision 930 Series
Operating Guide
USING THE PROJECTOR
Rev C February 2015
Geometry menu continued from previous page
Rotation
Rotation example
1
DMD™ area
The DMD™ is not rotated. It still covers the area that would be occupied
by the image without correction.
2
Rotated image
The image is smaller than the surrounding DMD™ area. It is scaled in
order to remain within the DMD™ area.
3
Angle of rotation
The angle equals a quarter of the
Rotation
setting.
In this example the angle is 5°, therefore
Rotation = 20
.
1
2
3
Select Item
[Menu] Return
Geometry >>
Overscan
Keystone
Rotation
Pincushion / Barrel
Top Left Corner
Aspect Ratio
Off
16:10
Top Right Corner
Bottom Left Corner
Bottom Right Corner
< Execute >
Reset
Blanking
[Enter] Execute
Rotation Adjust
Rotation
0
Notes
Rotation
is unavailable when using
any of the following:
•
Keystone
•
Pincushion / Barrel
•
Corners
•
Blanking
•
Edge Blend
For more information, see
Possible
Geometry and Edge Blend
combinations
further in this guide.
