page 88
Digital Projection HIGHlite Cine 330 3D Series
Reference Guide
3D SETUP
Rev E August 2014
•
Frame Sequential
The HDMI inputs will accept frame rates up to 60Hz and multiply the frame rate for display. An example would be 60Hz (30 frames per
eye in Left-Right sequence (L1, R1, L2, R2…), which is frame doubled, resulting in a displayed sequence at 120Hz (L1, R1, L1, R1, L2,
R2, L2, R2…).
For sequential 3D, an external sync is required to identify left and right frames. If no sync is available from the sequential source, the
projector will generate an output sync, but it may then be necessary to manually reset the dominance each time the player is started.
•
Frame Packing
This format will be detected, re-synchronised, frame-multiplied and displayed at 144Hz with the left eye / right eye dominance
automatically extracted from the video data. You need to optimize
Dark Time
and
Sync Delay
manually to suit your chosen switching
glasses.
Dark Time
and
Sync Delay
need to be set only once, to optimize the image for the glasses in use.
Notes
L
R
L
R
Frame Sequential
L
R
Frame Packing
