page 32
Digital Projection HIGHlite Cine 330 3D Series
Operating Guide
A TOUR OF THE MENUS
Rev E August 2014
3D Control
Use this sub-menu to enable, disable and set up 3D input, as follows:
•
3D Format
—
Off
,
Auto
,
Side by Side (Half)
,
Top and Bottom
,
Dual-Pipe, Frame Sequential
.
•
3D Swap
—
Normal
and
Reverse
(set to
Reverse
if the 3D images are
displayed in the wrong order)
•
Dark Time
—
0.65 ms
,
1.3 ms
,
1.9 ms
and
2.5 ms
. Set to reduce the
effect of images overlapping whilst the glasses are switching
•
Sync Delay
— set to compensate for signal processsing delays in the
projector.
Notes
Main Menu
3D Control
3D video is only possible on the
HDMI inputs.
Set
3D Format
to
Auto
to display
the Frame Packing format.
Set the
Dark Time
to the value
appropriate to the glasses or
ZScreen.
1.9 ms and 2.5 ms Dark Time
settings are unavailable when 3D
content is displayed at 144Hz.
Adjust the
Sync Delay
to eliminate
ghosting and achieve a smooth
grayscale.
For additional information on 3D
settings and a list of supported 3D
formats, see the
Reference Guide
.
3D Swap
Dark Time
MAIN >> 3D CONTROL
<Value>
3D Format
Auto
Side by Side (Half)
Top and Bottom
Off
Sync Delay
Dual-Pipe
Frame Sequential
