page 56
Digital Projection HIGHlite Cine 330 3D Series
Remote Communications Guide
IP CONFIGURATION UTILITY
Rev E August 2014
IP Configuration Utility
The IP Configuration utility can be used to change the IP Address, Subnet and
Gateway. DHCP can also be switched on or off.
To access the IP Configuration utility,
•
Type the URL http://<LAN IP Address> into the address bar of your browser,
then press
ENTER
.
The embedded web page shown on the right should appear.
Notes
The default LAN IP address is
192.168.0.100
You can use the
net.ipaddr
command to obtain the current IP
address.
Make a note of any new settings.
You will need them to reconnect to
the projector.
