page 9
Digital Projection HIGHlite Cine 330 3D Series
Installation and Quick-Start Guide
POSITIONING THE SCREEN AND PROJECTOR
Rev E August 2014
Positioning The Screen And Projector
1. Install the screen, ensuring that it is in the best position for viewing by your audience.
2. Mount the projector, ensuring that it is at a suitable distance from the screen for the image to fill the screen. Set the adjustable feet
so that the projector is level, and perpendicular to the screen.
Alternatively, four M4 bolts (max length 12 mm [0.5 in]) can be used to attach the projector to a ceiling mount (optional accessory).
The illustration below shows the positions of the feet for table mounting, and the fixing holes for ceiling mounting.
Notes
Always allow the lamp to cool for
5 minutes before:
- disconnecting the power
- moving the projector
- changing the lamp
Ensure that there is at least
30cm (12in) of space between the
ventilation outlets and any wall,
and 10cm (4in) on all other sides.
Do not tilt the projector more than
±8.5° from side to side when in
use, as this may cause serious
lamp failure, damage the lamp
module and cause extra cost on
replacement.
For exact measurements, please
refer to the CAD drawings.
See
Positioning the screen and
projector
in
the Reference Guide
for more information.
±8.5°
±8.5°
Location of the four ceiling mount holes on the projector underside
1
2
3
4
