page 87
Digital Projection HIGHlite Cine 330 3D Series
Reference Guide
3D SETUP
Rev E August 2014
3D Setup
In most situations you can use the
Auto
setting to have the projector automatically detect the format. Otherwise, consider the notes below to
help you set up the 3D input manually.
The following 3D formats are supported:
•
Side by Side (Half)
: interlaced and progressive, 50 and 60Hz
The side-by-side image will be de-interlaced (if appropriate), resized and then sequentially
displayed at 100 or 120Hz. The left eye / right eye dominance will be automatically
extracted from the video data, however you will need to optimize
Dark Time
and
Sync
Delay
manually to suit your chosen switching glasses.
When 3D is disabled, 1080i will be treated conventionally. For a 60Hz
Side by Side (Half)
source the two halves of the image will automatically be extracted to create a displayed rate
of twice the input rate.
•
Top and Bottom
Sets the projector to reformat the video frames and map them to the display with the left
eye / right eye dominance automatically extracted from the video data. You need to optimize
Dark Time
and
Sync Delay
manually to suit your chosen switching glasses. For a 60Hz
Top and Bottom
source, the two halves of the image will automatically be extracted to
create a displayed rate of twice the input rate.
•
Dual-Pipe (HDMI 1 and HDMI 2)
The left and right eye images are delivered on two separate HDMI links, which the projector
will interleave for 3D display.
Notes
L
R
Side by Side (Half)
L
R
Top and Bottom
L
R
Dual-Pipe
HDMI 1
HDMI 2
