page 30
Digital Projection HIGHlite Cine 330 3D Series
Operating Guide
A TOUR OF THE MENUS
Rev E August 2014
Main menu continued from previous page
Presets
The current image settings can be saved a preset, which you can recall later.
The default settings can be recalled at any time as well.
Up to four custom presets can be stored for each input source you use.
The following settings are saved in a preset:
•
From the
Main
menu —
Aspect Ratio
and
Overscan
•
From the
Image
menu —
Brightness
,
Contrast
,
Saturation
,
Hue
,
Sharpness
and
Noise Reduction
•
From the
Advanced Image
menu —
Colorspace
,
Gamma
,
Color Temperature
,
Color Gamut
,
Dynamic Black
,
Adaptive Contrast
,
RGB Offsets
and
RGB Gains
.
To save a preset:
1. From the
Main
menu, open
Presets
.
2. Highlight
Save Preset
on the left and then move to the list on the right.
Select the preset you wish to save and press
ENTER
/
SELECT
.
To recall a saved preset:
1. From the
Main
menu, open
Presets
.
2. Highlight
Recall Preset
on the left and move to the list on the right.
Select the preset you wish to recall, then press
ENTER
/
SELECT
.
Press
MENU
to leave the
Presets
page.
Save Preset
MAIN >> Presets >>
Recall Preset
Preset A
Preset B
Preset C
Preset D
Default
2
PIC
MUTE
4
B
SHARP
O-SCAN
NR
GAMMA
C-TEMP
TEST
BRI-C
3D
SWAP
3D
FORMAT
2D/3D
ENTER
SOURCE
3
6
1
ASPECT
RATIO
MENU
USER MEMORY
C
A
|
ON
POWER
OFF
User Memory
buttons on
the remote
Notes
Main Menu
Presets
Settings are saved ONLY for the
current input source.
Preset D is only accessible through
the
Presets
page of the menu or
via a protocol command, and not
through the remote.
For information on protocol
commands, see the
Remote
Communications Guide
.
