3–20
Removing and Replacing FRUs
3.2.6 CRT/Chassis Assembly
To disassemble the CRT/chassis assembly:
1. Remove the rear cover (Section 3.1.2).
2. Remove the top cover (Section 3.1.3).
3. Remove the interconnect cable (Section 3.2.1)
4. Remove the power supply module (Section 3.2.2)
5. Discharge the CRT and remove the anode cap (Section 3.2.3).
WARNING
You must discharge the CRT and remove the anode cap
(Section 3.2.3) before removing the deflection module.
6. Remove the deflection module (Section 3.2.4)
7. Remove the video casting assembly (Section 3.2.5)
NOTE
After removing the above FRUs, the remaining part is the
CRT/chassis assembly.
