3–8
Removing and Replacing FRUs
3.2.2 Power Supply Module
Remove the power supply module as follows:
1. Remove the rear cover (Section 3.1.2).
2. Remove the top cover (Section 3.1.3).
3. Remove the interconnect cable (Section 3.2.1).
4. Disconnect the 3-wire, 5-pin On/Off switch cable (P4) from the
connector (J4) at the top of the power supply by pressing the tab
on top of the connector (Figure 3–6).
M A - 0 2 3 0 - 9 0 . D G
P o w e r
S u p p l y
3 - W i r e , 5 - P i n ,
O n / O f f S w i t c h
C a b l e
Figure 3–6
Removing the On/Off Switch Cable from the Power Supply
