3
Removing and Replacing FRUs
3.1 Introduction
This chapter describes how to remove and replace the monitor field
replaceable units (FRUs).
The monitor consists of a small number of removable FRUs that are easily
accessed and removed from the rear of the monitor. No special tools are
needed, and self-retaining hardware is used.
The procedures describe how to remove the FRUs. To install each FRU,
do the reverse of the removal procedure.
WARNING
Turn power to the monitor off before performing any of these
procedures.
NOTE
Before removing any FRUs, you must remove the rear cover and
the top cover.
3–1
