3–2
Removing and Replacing FRUs
3.1.1 Removing the External Cables
Remove the external cables (Figure 3–1) as follows:
1. Make sure the power switch is off (out).
2. Unplug the power cord from the power source (wall outlet or host
system) first, then from the monitor.
3. Remove the signal cable from the rear of the monitor.
NOTE
Push the connector in and rotate it to the left until the signal
cable is released from the connector.
P o w e r S o u r c e
F r o m H o s t S y s t e m
P o w e r C o r d
M A - 0 2 2 5 - 9 0 . D G
Figure 3–1
Removing Cables from the Monitor
