A
Problem Solving
This appendix describes problems that you could encounter when
installing the DIGITAL Fast EtherWORKS PCI 10/100 adapter and
suggests possible causes and solutions.
Fault Isolation By Symptom
Table A–1 describes how to isolate faults by the symptoms that occur.
Table A–1 Fault Isolation By Symptom
Symptom
Possible Cause
Recommended Action
The system is
on, but there
is no display or
response from
the keyboard.
The monitor is either
not on or not connected
to the video board.
Be sure the monitor cable is
firmly connected to the video
board. Set the monitor’s power
switch to ON.
The Fast Ethernet
adapter is not seated
securely.
Turn your system off, reseat
the adapter, then turn
your system on again (see
Chapter 2).
The network cable is
loose.
Secure the cable.
(continued on next page)
A–1